Just curious if anyone else has done any testing on airlocks and sealed rooms. I've done quite a bit of testing on room dimensions for sealed rooms. The limit for a perfectly symmetrical rectangular room is 15x15x3 with the sealer embedded in the floor in the direct center of the room. If you increase the room height, or the walls in any direction by even 1 block (entire wall or ceiling, not just 1 block ), then the sealer can no longer seal the room.
I then tested by creating a 30x15x3 room with 2 sealers spaced evenly apart, directly in the center of each of the 15 x 15 areas, and they could not seal the room.
I also began testing out Airlock doors. Airlock doors work great, and I intend to put them in all of my overworld bases too. However, if you have 2 sealed rooms next to eachother, you can no longer open an airlock door. I then created an airlock room. small cube room with an airlock door on each side connecting sealed rooms together, but when passing between the rooms through the airlock room, you lose health.
Am I doing something wrong?
Minecraft Version = 1.5.2
Forge Version = 7.8.1.738
Galacticraft Version = a0.1.36.410
I then tested by creating a 30x15x3 room with 2 sealers spaced evenly apart, directly in the center of each of the 15 x 15 areas, and they could not seal the room.
I also began testing out Airlock doors. Airlock doors work great, and I intend to put them in all of my overworld bases too. However, if you have 2 sealed rooms next to eachother, you can no longer open an airlock door. I then created an airlock room. small cube room with an airlock door on each side connecting sealed rooms together, but when passing between the rooms through the airlock room, you lose health.
Am I doing something wrong?
Minecraft Version = 1.5.2
Forge Version = 7.8.1.738
Galacticraft Version = a0.1.36.410