Greetings folks
The team recently added a new option to allow lossy conversions via the Energy Storage Module/Cluster blocks.
I can't get it to work with anything other than 100. Tried 50, 75, 99, 100. Works properly at 100, but block accepts no power at other values.
To replicate:
Change this option
I:"Loss factor when converting energy as a percentage (100 = no loss, 90 = 10% loss ...)"=100
To (any other integer)
I:"Loss factor when converting energy as a percentage (100 = no loss, 90 = 10% loss ...)"=99
The block makes connections but accepts no power.
Tested with both Energy Storage Module and Energy Storage Cluster.
Tested with both MFSU (IC2) and various EnderIO capacitors as energy providers.
Confirmed using correct input dot (blocks suddenly receive power when you switch back to 100).
The team recently added a new option to allow lossy conversions via the Energy Storage Module/Cluster blocks.
I can't get it to work with anything other than 100. Tried 50, 75, 99, 100. Works properly at 100, but block accepts no power at other values.
To replicate:
Change this option
I:"Loss factor when converting energy as a percentage (100 = no loss, 90 = 10% loss ...)"=100
To (any other integer)
I:"Loss factor when converting energy as a percentage (100 = no loss, 90 = 10% loss ...)"=99
The block makes connections but accepts no power.
Tested with both Energy Storage Module and Energy Storage Cluster.
Tested with both MFSU (IC2) and various EnderIO capacitors as energy providers.
Confirmed using correct input dot (blocks suddenly receive power when you switch back to 100).